P/N: 811     MAIN FLOOR PANApplications: ALL

A LARGE FLOOR PAN THAT CAN BE USED FOR MANY APPLICATIONS. ONE SIDE HAS AN OFFSET FLANGE TO EASILY ATTACHMENT. THE RIBS ARE STAMPED 3/8THS DEEP WHICH ARE MUCH STRONGER AND DEEPER THAN THE SHALLOW ROLLED BEADS. MADE IN THE USA. BUY A SINGLE PIECE, PAIRS OR DOUBLE PAIR (4) FOR BEST VALUE.

 

P/N: 806     

FLOOR PAN

Applications: ALL BODY STYLES

THIS FLOOR PAN HAS SPECIAL FEATURE, ON ONE SIDE THERE IS AN OFFSET FLANGE 2-1/4 WIDE, THIS OFFSET CAN BE USED FOR THOSE TOUGH TO FIT AREAS, THE OFFSET NEARLY IMPOSSABLE TO BEND IN A FAB SHOP IS NOW MANUFACTURED IN SPECIAL TOOLING CREATED BY EMS. THE 2-1/4 FLANGE CAN ALSO BE BENT DOWN TO ACCOMADATE ANY ANGLE UP TO 90 DEGREES.
18 GAGE STEEL, THE RIBS ARE STAMPED 3/8THS DEEP WHICH ARE MUCH STRONGER AND DEEPER THAN THE SHALLOW ROLLED BEADS.  MADE IN THE USA

P/N : 807    

FLOOR PAN

Applications: All

STANDARD FLOOR PAN SECTION WITH AN OFFSET FLANGE AT EACH END FOR EASY INSTALLATION AND DOWN FLANGES ON THE SIDES FOR EASY INSTALLATION WELDING.  HEAVY 18 GAGE STEEL. MADE IN THE USA
THE RIBS ARE STAMPED 3/8THS DEEP WHICH ARE MUCH STRONGER AND DEEPER THAN THE OFTEN USED SHALLOW ROLLED BEADS.

P/N: 809     
FLOOR PAN
Applications: ALL BODIES

FLOOR PAN MAIN SECTION MADE WITH A TAPER THAT IS VERY COMMON IN EARLY 1930’S CAR WERE THE FRONT OF THE CAR IS NARROW VS THE WIDER REAR OF THE BODY.
MADE FROM HEAVY 18 GAGE STEEL,   THE RIBS ARE STAMPED 3/8THS   DEEP WHICH ARE MUCH STRONGER AND DEEPER THAN THE OFTEN USED SHALLOW ROLLED BEADS.  MANUFACTURED IN THE USA, SPECIFY LEFT OR RIGHT

                                      FLOOR PAN KIT

Applications: ALL BODIES

EMS AUTOMOTIVE THE LEADING PRODUCER OF STAMPED AUTOMOTIVE SHEETMETAL FOR THE HOT RODS, HAS DEVELOPED A SERIES OF UNIVERSAL FLOOR PAN KIT FOR TRADITIONAL HOT RODS AND CARS THAT LACK THE VOLUME FOR EXPENSIVE DIE STAMPED FLOORS

P/N: 870

THE ECONOMY STYLE FLOOR IS ONE OF 4 SUPERIOR FIT AND FINISH FLOOR KITS FOR TRADITIONAL HOT RODS AND CUSTOM CARS. EACH ONE OF THE FLOOR KITS IS MADE IN THE USA OF HEAVY 18 GAGE STEEL.

THE ECONOMY STYLE FLOOR KIT #870 INCLUDES (4) 29-1/2 X 24 FLOOR PANS WHICH HAVE QUALITY STRENGTHENING RIBS STAMPED INTO THEM VS LOWER QUALITY ROLLED RIBS, INCLUDED IS AN EXTRA CLEARANCE TRANS COVER AND DRIVE SHAFT TUNNEL, WHICH ARE HIGH FORMED DIE STAMPED PARTS.

THIS KIT WILL REPAIR A LARGE AREA OF FLOOR AT A ECONOMICAL PRICE

 

P/N: 871

THE UPGRADED ECONOMY STYLE FLOOR IS ONE OF 4 SUPERIOR FIT AND FINISH FLOOR KITS FOR TRADITIONAL HOT RODS AND CUSTOM CARS. EACH ONE OF THE FLOOR KITS IS MADE IN THE USA OF HEAVY 18 GAGE STEEL.

THE UPGRADED ECONOMY STYLE FLOOR KIT #871 INCLUDES (4) 29-1/2 X 24 FLOOR PANS WHICH HAVE QUALITY STRENGTHENING RIBS STAMPED INTO THEM VS LOWER QUALITY ROLLED RIBS, INCLUDED IS AN EXTRA CLEARANCE TRANS COVER AND DRIVE SHAFT TUNNEL, WHICH ARE HIGH FORMED DIE STAMPED PARTS.

THIS KIT INCLUDES (4) 4 X 4 X 48 FLOOR ANGLES THAT ARE OFTEN NEEDED TO ATTACH THE FLOOR TO A MORE RUSTED BODY AND FOR IMPROVING THE STRENGTH OF THE FLOOR TO BODY CONNECTION

THIS KIT WILL REPAIR A LARGE AREA OF FLOOR AT A ECONOMICAL PRICE

P/N: 872

THE “MASTER KIT” IS ONE OF 4 SUPERIOR FIT AND FINISH FLOOR KITS FOR TRADITIONAL HOT RODS AND CUSTOM CARS. EACH ONE OF THE FLOOR KITS IS MADE IN THE USA OF HEAVY 18 GAGE STEEL.

THE “MASTER KIT” STYLE FLOOR KIT #872 INCLUDES (4) 29-1/2 X 24 FLOOR PANS WHICH HAVE QUALITY STRENGTHENING RIBS STAMPED INTO THEM VS LOWER QUALITY ROLLED RIBS, INCLUDED IS AN EXTRA CLEARANCE TRANS COVER AND DRIVE SHAFT TUNNEL, WHICH ARE HIGH FORMED DIE STAMPED PARTS.

THIS KIT INCLUDES (4) 4 X 4 X 48 FLOOR ANGLES THAT ARE OFTEN NEEDED TO ATTACH THE FLOOR TO A MORE RUSTED BODY AND FOR IMPROVING THE STRENGTH OF THE FLOOR TO BODY CONNECTION AND 2 TOE BOARDS TO CONNECT THE FLOOR PANS TO THE FIREWALL.

THIS KIT WILL REPAIR A LARGE AREA OF FLOOR AT A GREAT PRICE

P/N: 873

THE “MASTER PLUS KIT” IS ONE OF 4 SUPERIOR FIT AND FINISH FLOOR KITS FOR TRADITIONAL HOT RODS AND CUSTOM CARS. EACH ONE OF THE FLOOR KITS IS MADE IN THE USA OF HEAVY 18 GAGE STEEL.

THE “MASTER PLUS KIT” STYLE FLOOR KIT #873 INCLUDES (4) 29-1/2 X 24 FLOOR PANS WHICH HAVE QUALITY STRENGTHENING RIBS STAMPED INTO THEM VS LOWER QUALITY ROLLED RIBS, INCLUDED IS AN EXTRA CLEARANCE TRANS COVER AND DRIVE SHAFT TUNNEL, WHICH ARE HIGH FORMED DIE STAMPED PARTS.

THIS KIT INCLUDES (4) 4 X 4 X 48 FLOOR ANGLES THAT ARE OFTEN NEEDED TO ATTACH THE FLOOR TO A MORE RUSTED BODY AND FOR IMPROVING THE STRENGTH OF THE FLOOR TO BODY CONNECTION AND 2 TOE BOARDS TO CONNECT THE FLOOR PANS TO THE FIREWALL.

4 HEAVY DUTY STAMPED 16 GAGE STEEL FLOOR BRACE ARE INCLUDED IN THE “MASTER PLUS” TO SUPPORT THE FLOOR PANS IN THE SEVERELY RUSTED BODIES THE BRACE PROVIDED A EXTRA LEVEL OF SUPPORT FOR THESE APPLICATIONS

THIS KIT WILL REPAIR A LARGE AREA OF FLOOR AT A GREAT PRICE